10 No-Fuss Methods To Figuring Out Your Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are durable, long-lasting and easy to maintain. They do not decay or rust as timber and aluminum.

It is crucial to wash and oil UPVC doors and windows regularly. This will help avoid unnecessary repair costs as well as increase energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause serious damage to your home and even be fatal. It is essential to take the time to make sure that you're doing all you can to ensure that your windows are in good repair.

For single pane windows it can be relatively simple to replace them, and the replacement will generally fit within the frame of the previous one easily. If windows with double panes are held together by internal beading, it will be difficult to remove and replace the old panes. In this instance you'll need locate some plastic spacers that assist the new pane to fit correctly into the frame of the window.

Wearing eye protection and heavy gloves is essential for anyone who plans to remove the glass yourself. You should also lay down a dropcloth before you begin working on the window panes so that any shards fall on the fabric, not onto the floor and could be trampled under.

It's a great idea to tape the gap once the glass has been removed. This will prevent drafts and water from getting into your home until a professional comes out to repair the window. This will also act as a barrier, preventing any intruders from gaining entry into your home. If the distance between the door and the window is substantial, you may need to consider an alarm system that includes a window. This will give you the best of both.

2. Sagging

Upvc is a long-lasting, energy-efficient and affordable alternative to timber sash windows. However, with time, they may be afflicted by a variety of issues like sliding. A window that is sagging can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to lose its shape, it is important to act swiftly to stop the issue from getting worse.

To fix a sagging window you can try repositioning the hinges. You'll first need to open the windows to reach the frame. Then, you can remove the top and bottom hinges using a screwdriver and adjust the hinges clockwise or counter-clockwise. Close your window to test the fit after you've moved your hinges. If you're satisfied with the fit, you can tighten the screws until they remain in position.

If you cannot reposition the hinges, you may need to replace the seal. As time passes, rubber seals lose their elasticity and dry out which causes their tightness to decrease. If this happens, it's essential to replace the seal as fast as you can to ensure that your upvc window repair windows remain watertight and safe from drafts.

UPVC handles can also become loose. Most often it is due to screws that have become loose over time. However, it could occur because the handle mechanism has been worn out. It's a good thing that it's simple to fix the loose uPVC window handle yourself. The first step is to close the window repair and perform an initial test to ensure that it fits. The corners of the sash should align with the casing joint. If it doesn't, you can make use of a screwdriver to loosen the handle and reverse the mechanism back into the position it was in.

3. Water Leaks

If you wake up to wet floors and mouldy walls every time it rains it's crucial to take action. Water leaks through windows can cause structural damage to your home and hinder your ability to control the temperature in your home. The most common cause for leaking uPVC windows is that the sealant surrounding the frame is either damaged or is missing.

This is a fairly simple fix that can be done by any competent DIYer. Based on the severity of the issue the caulking used previously might need to be removed before a fresh layer can be applied. It is important to remember that when it comes to uPVC window repairs, you should not be tempted to 'over-caulk in order to make the area harder to clean and can reduce the efficiency of your energy.

It is crucial to make sure that the drainage holes are free of debris and that the sill pan has been angled in a way that allows it to drain away from the window. In more serious instances, you may need to replace the window.

Mold spots and rotten sills are another sign of water leakage. This mold thrives in damp environments and is able to quickly spread throughout the home.

It is also important to note that if the leakage originates from the glass of your double glazed window repairs glazed windows, it is more likely to be an issue with the glass seal, rather than the frame or sagging. A uPVC specialist can fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges may be to blame if your uPVC window is difficult to open or it opens in a breeze. They can be easily repaired by any DIYer who is skilled and can be completed in a matter of minutes.

Like all mechanical parts hinges are prone to wear out over time. The process of replacing a hinge on a window is an easy process, but it's simpler if you have someone to help you hold the frame in place.

It is also worth checking that the uPVC hinges are opening and closed in the right direction. You can check this by looking for the arrows on each hinge, this shows which way the window should be opened.

The problem can be caused either by opening the window improperly or by a poor installation in the factory. This can often be resolved by sending us a photo via our website and we will be more than happy to give you advice.

Regularly lubricating the hinges is also necessary. This can be done by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It also helps prevent corrosion and reduce the risk of sticking. This must be done at a minimum every year. WD40 and other solvent-based oils are not recommended because they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by different things. The hinges may also become unbalanced due to wear, causing gaps between the frame and sash. They can be repaired by giving them good cleaning, but in the event that they are beyond repair it could be necessary to have them realigned or replaced. In addition, the interlock could be misaligned. This is located on the hinge's side, and might require to be cleaned. In some cases it might be necessary to replace them.

The next common reason for draughts is window seals. These are prone to wear or damaged over time, and allow air to escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Another option is to replace the window with low-emissivity glass. this will help in regulating indoor temperatures and will lessen draughts.

The last way to reduce drafts effectively is to use a draught-excluder. These are usually made of fabric tubes filled with a filler, which can be hung over your window sill. They can help keep cold air out and keep your home warm and cosy!

The windows made of upvc can keep providing excellent insulation and security to your home with a little regular maintenance and repairs. However, it is important to realize that windows last for a certain period of time and there may come the point when it's more cost-effective to replace them rather than repair them. So, if you are experiencing issues with your Upvc windows, it is always recommended to seek assistance from a professional as soon as you can.