5 Laws Anyone Working In Repairs To Upvc Windows Should Know

Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they are not susceptible to corrosion or rot.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will help prevent unnecessary repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window is broken it can cause a huge deal of damage to your home, making it extremely dangerous and possibly fatal. It is crucial to take the time to ensure that you're doing all you can to ensure that your windows are in good condition.

Single-pane windows are relatively simple to replace and generally fit into frames that were previously in use very easily. However, if windows with double panes are anchored by internal beading, it will be more difficult to get rid of the old panes and put in new ones. In this case it is essential to purchase plastic spacers to make sure that the new pane fits into the window frame.

If you're planning attempt to remove the window panes yourself, it is essential to wear the appropriate safety equipment that includes gloves with a thick layer of material and eye protection. You should also lay down a dropcloth before you begin working on the window panes to ensure that any shards fall onto the fabric and not onto the floor and could be trampled.

Once the glass is removed, it's a good idea to seal the gap with some clear packaging tape or duct tape to prevent water and drafts from getting into the property until a professional is able to come out and fix the window. This also serves as a barrier to prevent any intruders from making their way into your home. If the distance between the window doctor and the door is substantial, you may need to consider security screens that includes windows. This will give you the best of both.

2. Sagging

Upvc windows and doors are a cost-effective, durable and energy-efficient alternative to timber sash windows. However, over time they may be afflicted by a variety of issues, including sliding. A window that isn't properly aligned can cause problems with light, draughts and even security. If you find that your uPVC window is beginning to lose its shape, it's important to act quickly to stop the issue from worsening.

To fix a sagging window you can try to reposition the hinges. To accomplish this, you'll have to open the window so that you can get to the frame. With an screwdriver, take off the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after having repositioned your hinges. If you're happy with the fit, you can tighten the screws to ensure that they stay in place.

If you cannot reposition the hinges, you may have to replace the seal. Rubber seals can dry out and lose their elasticity over time, which causes them to loosen. It is crucial to replace your seal as quickly as you can in order to keep your uPVC window watertight and draughtproof.

uPVC handles may also loosen. The majority of the time this is due to screws that have come loose over time. However, it could occur because the handle mechanism has worn out. It's relatively simple to fix a loose uPVC hand. First, you'll need close the window and then perform an initial test fit. The joints at the corners of the sash should align with the joint on the casing. If it does not, you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism into position.

3. Water Leaks

It is crucial to take action if you get up each morning to discover mouldy walls and wet floors. Windows that leak water do are not just a cause for degrading of the structure of your home but also undermine your efforts to regulate the temperature inside your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is an easy fix that can be accomplished by any DIYer who is competent. Depending on how severe the issue is, the old caulking may need to be removed. It is important to remember that when it is about uPVC window repairs you should not be tempted to apply too much caulk in order to make the area more difficult to clean and could reduce your energy efficiency.

Verify that the drainage holes have no debris inside them and ensure that the sill pan has been properly angled to allow the water to drain from the window. In more serious situations, you may have to replace the window.

Other signs of long-term water leakage are rotted sills and the appearance of black spots of mold on the walls near the window. This fungus thrives in damp conditions and is able to quickly spread throughout the house.

If the leakage is occurring between the double-glazed glass, it is more likely that the issue is more with the seal rather than the frame. Again this can easily be corrected by a uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame when your uPVC window is difficult to open or if it blows open with an ease. Anyone who is a skilled DIYer can fix these in a matter of minutes.

Almost every household in the UK will have top-hung or side hung uPVC windows that use hinges and, just like any mechanical component they can wear down over time. It's easy to replace a hinge on a window but it's much easier if someone else helps hold the frame.

Verify that the uPVC hinges open and close in the correct direction. This can be done by looking for the arrow on each hinge. This indicates which way the window should open.

The problem can be caused by opening the window improperly or by a poor installation at the factory. This can often be resolved by sending us a picture via our website and we will be happy to give you advice.

Regularly lubricating the hinges is essential. Applying a light engineering lubricant to the hinges is a great method to accomplish this. We recommend using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window to open and close more easily. It also helps prevent corrosion and reduce the risk of sticking. This should be done at least every year. WD40 or other solvent-based lubricants should not be used since they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different causes. First, the hinges because of wear and tear, may become displaced, which will cause an opening to appear where the sash joins the frame. This can be easily repaired by giving them thorough clean, however if they are beyond repair it might be necessary to get them realigned or replaced. The interlock, which is located on the hinge of the window, can be misaligned. Again, it may be possible to just give them a good clean, but in certain cases, it may be necessary to get them replaced.

The seals may wear out or become damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity lenses. This will help regulate indoor temperatures and lessen draughts.

The final method to cut down on drafts effectively is to use a draught-excluder. These are usually fabric tubes filled with a filler, which can be put on top of your window sill. They can help keep cold air out and keep your home warm and cosy!

With a little maintenance and repairs your windows made of upvc will continue to provide an excellent level of security and upvc window Repairs insulation for your home. It is essential to remember that all windows eventually get worn out and it may be more cost-effective to simply replace them rather than repair them. If you encounter any issues with your upvc window you should consult a professional immediately.