10 Things We All We Hate About Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are long-lasting, durable and easy to maintain. In contrast to aluminium and timber, they don't rust or rot.

It is important to clean and oil UPVC doors and windows regularly. This will save you from unnecessary repair costs and also improve energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it could cause a large amount of damage to your home, making it very dangerous and potentially fatal. It is crucial to take the time to ensure that you're doing all you can to keep your windows in good condition.

Single-pane windows are relatively simple to replace, and they typically fit into frames that were previously in use very easily. However when windows with double glazed window repairs near me panes are held in place by internal beading, it will be more difficult to remove the panes that are in place and replace them with new ones. In this case it is essential to purchase plastic spacers in order to aid in fitting the new pane into the window frame.

Wearing protective eyewear and thick gloves is essential when you are planning to remove the glass yourself. It is also recommended to lay down a drop cloth before you start working on the glass so that any shards will fall onto the fabric rather than on the floor where they could be trodden under and cause further damage.

It's a great idea to tape the gap once the glass is removed. This will prevent drafts and water from getting into your home until a professional comes out to repair the window. This will also provide an obstruction to prevent intruders from making their way into your home. If the gap is large, you may think about the security door with an integrated window as this will offer the best of both worlds.

2. Sagging

uPVC is durable, energy-efficient and affordable alternative to timber sash window. Over time, they can be affected by a variety of issues that include sagging. A sagging uPVC windows could cause issues with light, draughts and even security. It's important to take action when you notice your uPVC windows are sliding.

Repositioning the hinges could help fix a window that is sagging. You'll first need to open the windows so you can get at the frame. After that, using the screwdriver, you'll be able to take off the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to check the fit after you've relocated your hinges. If you are happy with the fit of your window, you can tighten screws to hold them in the right position.

If you are unable to reposition the hinges, you may have to replace the seal. Rubber seals can dry out and lose their elasticity with time, which causes them to loosen. It is essential to replace your seal as soon as you can in order to keep your uPVC window watertight and draughtproof.

UPVC handles can also loosen up. This is often caused by screws that have loosened over time, but it can be caused by the handle mechanism wears out. It's relatively simple to fix a loose uPVC handle. You'll first need to close the window and then perform an initial fitting. The joint at the corners of the sash should align with the joint on the casing. If it isn't then you can use a screwdriver to loosen the handle and turn the mechanism back into its original position.

3. Water Leaks

It is important to take action if you awake each day to find mouldy walls and wet floors. Water leaks from windows are not just a cause for degradation of your home's structure but also undermine your efforts to control the temperature in your home. The most common cause for leaks in uPVC windows is that the sealant surrounding the frame has been damaged or not present.

This is a simple fix that can be accomplished by any DIYer who has the ability. Based on the severity of the problem the caulking used previously may need to be removed before a new layer can be applied. It is crucial to remember that when it comes to uPVC window repairs, do not be tempted to 'over-caulk' as this will only make the area harder to clean and reduce the efficiency of your energy.

It is essential to ensure that any drainage holes are free of debris and that the sill pan is placed correctly so that it drains away from the window. In more extreme instances, you may need to replace the window.

Mold spots and rotted sills are other signs of water leakage. This fungus thrives in conditions of dampness and can spread quickly throughout the home.

It is also important to keep in mind that if the leak is coming from between the glass of your double glazed windows it may be more likely to be a problem with the glass seal, rather than the frame or sliding. A uPVC specialist can fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be the reason for the reason that your upvc window repair window is difficult to open or double Glazed window Repairs near me it blows open with a breeze. They can be replaced by any competent DIYer and are usually done within a few minutes.

Like all mechanical parts hinges are prone to wear out over time. It is an easy procedure, but it is easier if you have someone to assist in holding the frame in place.

Make sure that the uPVC hinges are open and closed in the proper direction. Look for the arrows on each hinge to determine which way the window should be opened.

Window hinges that aren't working properly could be the result of incorrectly opening the window in a certain manner or because of inadequate installation at the factory. Sending us a picture through our website can often solve the issue. We are more than happy to give advice.

It is also important to grease the hinges regularly. This can be done by applying an oil that is light in nature to the hinges, we recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regularly lubrication will help the window to open and double Glazed window Repairs near me close more easily. It can also lower the chance of windows sticking and prevent corrosion. This is recommended to be done at least once a year. WD40 and other solvent based lubricants are not recommended as they could damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by various factors. The hinges can also be misaligned due to wear, causing a gap between the frame and sash. This can be easily repaired by giving them good cleaning, but if they are beyond repair it might be necessary to get them re-aligned or replaced. The interlock may also become unbalanced. This is located on the hinge's side and may need to be cleaned. In certain instances it might be necessary to replace them.

The seals may wear out or be damaged over time, allowing air escape. Replacing these with high-quality weatherstripping can help prevent draughts. Replace the upvc windows with low-emissivity glasses. This will help to regulate indoor temperatures and lessen the risk of draughts.

The final method to cut down on the amount of draughts is to use a Draught-exclusion device. These are typically fabric tubes filled with a filler which can be placed over your window sill. These will keep your home warm by blocking cold air.

The windows made of upvc can keep providing excellent insulation and security in your home by performing regular maintenance and repairs. However, it is important to recognize that all windows have a life span and eventually, they will reach an point at which it is more efficient to replace them than repair them. So, if you're having issues with your upvc windows, it's best to seek professional assistance immediately.