10 Facts About Window Repair That Will Instantly Get You Into A Great Mood

Window Repairs

Window repairs can save homeowners money and keep their homes warm. In the event of major damage, such as broken glass or a damaged frame, a window replacement could be necessary.

Many other issues can be solved to prolong the longevity of windows. Some common problems include:

Broken or cracked Panes

If it's an unintentional rock that was tossed by your lawnmowers or a tree branch that has been blown by strong winds, cracked windows are not just visually unappealing, but also can result in more expensive electricity bills because the broken pieces let cold air to enter your home. Fortunately, it's generally easy to fix windows with damaged panes.

Start by carefully removing the glass with gloves and safety glasses. You may have use a utility knife to break loose the old glazing compound or putty around the frame's edges. Then, clean the glass's surface and the frame's wood using a soft cloth or paper towel.

After the area is cleaned, apply a waterproof silicone caulking around the frame's perimeter. This will stop water from entering the frame through the cracks and cause further damage.

A crack that is severe in double-paned glass could affect the gas between the panes, which can make your windows less insulative. If the crack is severe enough to compromise the integrity of the glass, or if you have an inner pane that's completely missing, it might be the time to call an expert.

Cracks in the glass caused by thermal stress may occur when there is a drastic difference in temperature inside and outside your home. This causes the glass to expand and contract. If the cracks are on two sides of a Window Repair, it is recommended to replace it instead of try to repair it.

Clear tape can be used to fill cracks in windows that aren't yet ready for replacement. It will also keep out cold winds and bugs. You can cut a nylon stocking large enough to completely cover the crack and glue it with duct tape. It's not a solution that will last forever however it's a great solution in a pinch and it keeps cold air and insects from entering your home. If you notice cracks or blemishes on your older windows it is recommended to contact your local business to determine if replacing the whole window is a better option.

Rotten Wood

Wood rot is one of the most frequent issues with windows. It can degrade a house's appearance and pose a safety danger. It is possible to repair damaged wood. First, you must address the cause of the wood rot. This can be accomplished by examining for leaks in the roof or gutters that are not functioning, cracked caulking and any other areas that allow water to get into the wood.

You'll then have to take out the rotten components of the window frame. This can be done with the use of a chisel, rasp or claw hammer. After you have removed the decayed wood, you'll have to replace it with fresh wood. Pre-treated wood is recommended for this project since it will resist rot. If you cannot replace the damaged timber, you can use filler and wood hardener to reinforce the damaged area. This kind of product will be found in a lot of hardware stores. To get the best results, adhere to the instructions on the label.

After you have repaired the damaged areas of the window sill, it's essential to safeguard the area. This can be done by applying a waterproof wood sealant. Sikkens for instance, is a great product to apply.

Use a two-part epoxy to protect the wood from further damage. It is easy to apply and leaves a nice finish. However, it is very important that you follow the directions for application on the label. After the epoxy filler dries, you can sand down the wood's surface. Start with a rough sandpaper, and then move on to more smoother grades.

The last thing you want to do is to make the rotted area even worse by expose it to more water. So, it's recommended to cover the area that has been repaired with an oil-based primer which will protect it from moisture. Then, you can apply the wood sealant, which is waterproof.

The W won't open

The reason a window won't open could be due to various reasons. The house may have settled, Window Repair or the wood frames may have warped in rainy weather. There is also the possibility that someone secured them with a nail for security. With a bit of patience and the right tools, you can open the majority of stuck windows.

Gunk or debris that has accumulated could be the main cause of a window not opening. Acme Glass notes that dirt and grime build up over time on sliding tracks, hinges, and locks. Additionally, metal hardware is prone to be rusty when it comes in contact with humidity or direct sunlight. Keeping these areas lubricated with spray grease can prevent oxidation and keep your window functioning correctly.

The pulleys used to raise or lower the upvc window repairs can become loose, or even break. These parts can be weakened and obstructed if they are located two or more floors above ground.

If you are having trouble opening windows try using a pry bar to gently push the window to open a bit at each time. Place a wood block on the frame to give the pry bar more leverage, and be careful not to damage the window or wood. Try applying a hairdryer along the frame's edges for several minutes. This will warm the wood and make it easier to move.

Another common problem for windows that aren't opening is a defective spring that prevents the window jamb from lowering or rising. Depending on who manufactured your windows, you will be required to refer to the manual of your owner for additional instructions.

If you have tried cleaning the moving parts of your windows and then lubricating them but they're still unable to open it could be the right time to replace windows with energy-efficient, new windows from Homespire Windows and Doors. Don't let your windows slide from functional to unusable because windows that aren't properly closed can make your home vulnerable to burglary and water damage. Contact our team to learn more about our replacement windows and services today!