What Experts In The Field Want You To Know
How to Replace a Kia Sportage Replacement Key
For many Kia models keys, there is a keyless entry system built-in. The key is usually akin to a remote control and can be changed with a brand new one from a 2015 kia optima key fob programming dealer or a locksmith.
Key fobs might stop working due to a number of reasons, including batteries that are dead, worn-out buttons, signal interference or water damage. Here are some tips to help you get your Kia sportage replacement key working again.
How do you replace the remote key or smartkey?
It doesn't matter if your Kia is equipped with an intelligent key, remote key, push-to-start keys, or regular metal non-transponder key The battery inside these keys will eventually need replacing kia key Fob. This is particularly the case if your car displays a message telling you that the remote or smart keys are not powered by batteries.
It's an easy procedure. In order to replace the battery in the key fob, remove the mechanical key from the slit on the back of the key fob. Next, lift the cover. Inside the key fob there will be tiny screws that hold the battery in place. Remove the old battery by unwinding the screw using the help of a small screwdriver. Insert the new battery and close the slit on the key fob.
When the key fob is equipped with a fresh battery check it by pressing the locks and unlock buttons. If the doors lock and unlock in the same way, you're in good shape! You can now make use of the hands-free lock/unlock feature on your 2016 kia soul replacement key when your fingers start to get cold or you have to do some errands in Brandon.
Note: Some key fobs might need to be programmed (transponder chips or smart keys). This requires a specific programming machine that only the dealer or locksmith has access to. Other keys (non-transponder metal keys) do not require programming. If you're looking to reprogramme your key, it is necessary to record the key code number on the tag for the key code.
How to replace the battery
If the Kia key fob doesn't respond when you press the lock/unlock button, it's a sign that the battery is not fully charged. A low battery may also cause other issues such as the check engine light turning on or delayed engine cranking. It is fairly easy to replace the key fob batteries using just a few simple tools.
Before you begin ensure that your vehicle is turned off and all doors are shut. Find the small, metal or plastic piece that is located at the bottom of the key fob. Move it until the key pops out. The key can be inserted into the driver door handle to unlock your car.
To replace the key fob's battery, remove the cover on the rear and use a plastic bar tool to release the latch that holds the black negative battery cable. Take the old battery out, and then orient the replacement battery to ensure that its "+" side is facing you, and the "-", negative side is facing the fob's electrical contacts. Push the new CR2032 battery straight into place without putting too much force on it to avoid bending or damaging the contacts on the metal.
Once the new battery has been installed and the key fob is turned on, turn it off and back on in the ignition repeatedly until the door locks cycle. Then, you can test your Kia key fob and see whether it's functioning properly again.
How to replace a smart key
Depending on the model of your kia remote keyless entry Sportage, you may have a standard key fob or a smart key. The difference between these is that the smart key is equipped with a small mechanical key blade hidden within it, whereas the standard key fob does not. Both key fobs are equipped with batteries that will eventually require replacing. Fortunately, this is quite simple and takes only two minutes.
Make sure to shut off your Kia and be on a level and well-lit surface prior to you begin. Be aware that the fob is made up of tiny parts that could be thrown off when you're not careful.
The release button for the small size is located on the lower backside. It could be a circular silver button or a rectangular slot. After pressing this button the mechanical key blade will pop out and you will be able to open the key fob.
Once you have the key fob opened, you can simply take out the old battery and replace it. The new battery should be a CR-2032, and can be purchased online or at a local auto parts store. After you've finished, your key fob will allow you to lock, unlock, and start your vehicle even if it's not running.
How do you replace a broken mechanical key
The Kia keyfob is an excellent convenience that lets us lock or unlock our car by pressing a button. But, as with all devices it may have issues at times. There are solutions to address these issues and keep your key fobs working for the duration of.
A dead or drained battery is one of the most frequent problems. This can cause the device to stop working completely or even to stop working intermittently. If this is the issue it is time to replace the battery a new one.
If this isn't enough to resolve the problem, try using a standard flathead screwdriver to wedge open the casing of the fob's plastic. Be careful not to damage any internal components or scratch the plastic. After opening, carefully remove the battery that was removed and replace it with a new one.
When the new battery is in, shut and open the doors with the mechanical key (every kia car key replacement cost fob has an emergency mechanical key that can fit into the slot). Test the key fob to confirm it's functioning properly. Contact a dealer, or a locksmith to resolve the problem if the fob is still not working. Make sure they cut you an emergency key that functions across all trunk and door cylinders to avoid future lockouts.