Fitting Cat Flap In UPVC Door Panel

Cat flaps let your cat leave and come back as they please without you needing to let them in or out. They also help prevent your cat from toileting in the house.

It is easier to install an animal flap on a Upvc panel than on a glass one however, you'll require some expertise and right tools.

Measure the Door

The installation of a cat flap inside the door can be a challenge however, as long as you select the right kind of cat flap double glazing flap make sure you take your time and follow the steps provided it shouldn't be too much trouble. We will help you draw the shape and then use an jigsaw to cut out the door area. Then we will finish the job by attaching the cat flap. This will ensure that the flap remains in place and shields the door from wind and rain damaging the door.

To determine the size of the cat flap that you require, measure your pet's width. This will enable you to choose a cat flap that is large enough for your pet to walk into the house and leave without having to open the door every time.

If your kit comes with an illustration of the location to drill, then put it on the door and then draw a pencil around it. If your door has moulding or a sill at the bottom, make sure you leave enough space between your cat and these elements.

Use a set square to make sure you are cutting correctly and ensure that the hole is a good rectangle shape. When you are satisfied with the result, you can start removing the rest of the door material. If you have an already-cut square, use it to ensure that you're cutting properly and to make sure the hole is a good rectangle shape, once you are satisfied with this you can begin to take off the remaining door material.

Draw a Line

The cat flap is a great way to allow your pet to go in and out without worrying about them being in the house with guests or leaving unwelcome gifts in the home. It also stops draughts and helps keep your home's temperature steady. However, putting the cat flap to your door could be an overwhelming task for those who haven't done it before, leading many people to call a professional joiner or carpenter to do the job. While this is certainly an option, it's possible to do the work yourself if you have the right tools and follow the instructions with care.

It is much easier to do with doors made of wood, however it is still possible using uPVC. However, you must be careful not to damage the doors because this will make it impossible to claim your warranty. First, you need to measure the door to ensure that it can accommodate the new cat-flap. This isn't too difficult when you have an ordinary upvc door panels cat flap door, however you might need to take extra care if you are using an alternative kind of door, as they are more difficult to cut than solid uPVC panels.

The next step is to determine the height of your cat's stomach. This is the measurement from the floor to the underside of the cat's stomach and you'll need find a spot on the door that will be within the range that your cat is able to comfortably walk through wall cat flap. Once you know this you'll have to draw the area using a pencil and a spirit level to ensure that the hole you create will fit your cat.

After you have marked the area, it's time to cut out the hole. You will need an jigsaw. It is crucial to take your time in order to ensure that the cuts are clean and smooth rather than rough and uneven, as this could damage your door. You should also remember to wear safety glasses and a dust protection mask when working with the jigsaw as breathing in the dust can be dangerous to your health. Once you've finished cutting the hole, you will need sandpaper to smooth the edges so that the cat flap is easily inserted.

Cut a hole

It can be a challenge to fit a cat flap into a door panel or sealed double glazing unit. You may be tempted to do it yourself, but unless have plenty of expertise in DIY, it's likely to be best to have a professional to do the job for you. A botched job may not just be ugly, but it could also be an enigma for security as well as allowing cold air to enter when the cat is outside, and hot air to escape when inside.

Mark the hole's position on the door with the help of a pencil and a spirit level. This will ensure it is correctly positioned and aligns with the door's other parts. It is important to have a piece of sandpaper at ready for any rough edges.

Wear any safety gear you'll need to use the power tool. If you are worried about the noise of the jigsaw, Fitting Cat Flap In Upvc Door Panel consider buying a cordless version which is much quieter and easier to use.

It is best to only remove the material that is required to create the cat flap. It is essential to leave a bit of material to make the wall thickness of the cat flap. However, removing too much can cause problems or even damage the door frame.

A upvc door may include a metal frame, or panel that will interfere with the microchip cat flap if this is the case you'll need to make an over-sized hole to ensure that the metal doesn't get in contact with the wall of the cat flap, if this is the case, it is crucial to fill in the gap and render it watertight.

If you are fitting an animal flap to a upvc door or double-glazed window with a metal frame then you will need to speak to a specialist who can provide you with a brand new pane of glass with the hole for the cat flap inside. It is cheaper to get this done rather than trying to fix the cat flap onto an existing glass pane that was not designed specifically for the purpose.

Fit the Flap

Cat flaps let your pet leave and come as they please, giving them the freedom to relax in the home whenever they feel like it. However, if you have an uPVC door it can be difficult to fit a cat flap, particularly when you don't have glass panes that can be cut to accommodate one. If you're looking to install a half-glazed uPVC replacement panel, it is possible to add an additional cat flap. It's not a simple matter of cutting a hole into the door. It is also necessary to perform a few steps to ensure that the door is secure.

A composite, uPVC or GRP door panel is generally made up of a plastic skin which is bonded to an insulating polystyrene base. It is crucial to be cautious when cutting the material. This type of door typically has a template that you can use as a guide to cut the hole in your door.

After you have carved out the hole in your front door, it is time to install the cat flap. You can purchase and install a wide variety of different models including basic push-button operated ones to microchip activated units that allow access only to your pet. Whatever kind of cat flap you pick it's essential that your cat can use the flap without getting stuck outside in the rain.

It's a good idea to opt for a circular fitting Cat flap in upvc door panel (bbs.theviko.com) rather than one that is square, since circles are more securely cut into the door glass. This is because square holes leave the glass vulnerable to cracking if a drill is used on it. This is also a safer choice because you won't need to drill into the toughened glass that could break and hurt your pet or family. This is particularly crucial if you have a child or an elderly person living at home who could be injured by shards glass.