You Can Explain Ghost Immobiliser 2 To Your Mom

ghost immobiliser 2 (Dnpaint.co.kr)

Secures your vehicle from key cloning and stops thieves from driving the vehicle using original keys. Our latest immobiliser is connected to the CAN data network in your vehicle and a unique pin must be entered to begin the engine.

In contrast to trackers, Ghost does not transmit any radio frequency signals and cannot be detected by diagnostic tools. Ghost doesn't have LED indicators or buttons that would indicate its presence in your van or car.

Anti-key cloning

The ghost immobiliser was designed to stop key cloning and hacking. The device is connected to your vehicle's data network CAN, and creates a unique pin number using the factory buttons in your dashboard and steering. This prevents the thief from being able to start your car. If the wrong PIN code is entered, your car will not be started and it will be impossible for them to drive away with your joy and pride.

A ghost car immobiliser immobiliser uses new technology that is very difficult for thieves to beat. The ghost immobiliser unlike physical deterrents, like wheel locks or steering locks that are able to be cut, is a discrete electronic device. It isn't detected by thieves because it does not emit radio signals and functions in a quiet manner.

The new generation of immobiliser is able to protect your car from a range of threats, including key-hacking, cloned keys and relay attacks. It is also able to stop the thief from adding an additional key or replacing your ECU in the sense that it will not allow them to start your car without entering the correct PIN code first.

The ghost immobiliser 2 unlike other immobilisers, it does not require the use of a remote control or key fob to operate. It can be turned off via the driver's mobile by using a simple app. This is ideal the time you have to give your car to valet parking, or maintenance without key fobs.

The Autowatch Ghost-II is the latest version of our groundbreaking ghost immobiliser. It is designed to make it as easy and convenient to use while remaining as secure as is possible. This is accomplished by connecting the Ghost-II with the vehicle's CAN data network, meaning there are no extra wires that are able to be hidden or easily discovered. It comes with built-in features that allow you to disarm the Ghost-II simply by connecting it to the vehicle's Bluetooth.

OBD port hacking

OBD port hacking is the latest method employed by professional car thieves to steal vehicles. Thieves can gain access to your vehicle's OBD with a laptop, a mobile application, and a few cables that can be bought online for less than PS50. Once they have access, they will be able to do anything they want including resetting your vehicle's fault codes, tuning your car, or even getting it stolen in under a minute.

If you have a Ghost immobiliser fitted it can stop your car being stolen with this method by needing a unique PIN code sequence is entered alongside the fob of your key in order to start the engine and drive away. It does this by interacting with the vehicle's ECU (Engine Control Unit) via the CAN Data circuit, and is completely undetectable to any RF scanning or code grabbing technology. It has a Service/Valet Mode that allows your vehicle to start without the PIN code.

You'll also require an OBD cable that has OBD pins, which are connected to the CAN bus. These cables are available on eBay or Amazon for around PS50. You will also need an OBD cable that has OBD pins that connect to the CAN bus, these are available on eBay and Amazon for around PS50. Then, you need to splice the cable into the wire harness of your vehicle for example, the radio wiring harness.

Once the hacker has gained a connection to your vehicles OBD port, they can send diagnostics requests to the system at high baud rates that can crash the CAN and stop systems inside your car from functioning. This could cause the engine to stall and doors to lock, or even the brakes to engage.

No need for additional remotes or key fobs

The car immobiliser is an excellent piece of anti-theft technology utilized by millions of modern vehicles across the globe. An aftermarket immobiliser protects your vehicle through the use of engine ECU software that stops cars from starting when a false transponder is transmitted.

However, it can be easy for thieves to circumvent an immobiliser system when they have access to the code that allows them to disable it. A burglar could easily take the battery off of most key fobs by squeezing them open. They can then use an instrument to remove the circuit board inside an immobiliser and replace it with a blank. Then, they'll be in a position to start your vehicle.

With the TASSA approved Ghost 2 immobiliser, there are no additional keys or remotes required. The immobiliser connects to the vehicle's engine ECU (Engine Control Unit) through a discreet and silent data circuit in CAN that is not detectable by diagnostic tools, such as those used by high-tech thieves. It also doesn't utilize a traditional key fob with LED indicators, which means it is able to go unnoticed in plain sight.

There will be occasions where you have to disable Autowatch ghost immobiliser near me 2's automatic security for example, when you are doing a valet parking or servicing. Ghost CAN immobilisers feature a mode called "Service Mode,' which you can activate by just a click of a button on your phone. The car is still operational, but the maximum speed is limited to 36 mph.

If you'd like more information about the TASSA accredited ghost immobiliser, contact us today to book a demonstration at our workshop. A member of our team will explain the process and will give you a Ghost 2 emergency card, installation certificate, and security assurance.

Simple PIN code Change Process

Ghost is a next generation device that protects your vehicle without cutting wires or installing aftermarket key fobs. It connects directly to the vehicle's CAN data network. A personal PIN can be created using buttons on the dash and steering wheel. The device doesn't emit RF signals, which means it cannot be bypassed. This makes it difficult to detect by sophisticated RF scanning and code grabbing techniques used by modern thieves.

The PIN code sequence can be altered whenever you wish to lock out previous drivers. It even comes with an override option in the event of lost sequences. The installer will guide you through how to do this during installation. The system also includes the option of a valet mode that can be used to temporarily disable the pin input sequence to allow your mechanic or garage can fix the vehicle without needing to know the pin code. This is ideal for those who want to give their car to valet parking or service but don't want divulge the PIN sequence.

Unlike Thatcham products that require additional key-fobs in order to operate, Ghost is a discreet system which takes advantage of the buttons inside your vehicle to create a unique and interchangeable PIN code sequence. This sequence is entered through the app on your smartphone, which means no extra LED indications are being thrown, and your vehicle is secure and safe from the possibility of being disabled by hackers or any other technology.

Every vehicle is tested

Ghost immobilisers, unlike key fobs that require pressing buttons, is hidden under the dash or on the steering wheel. It is not obvious that it's there. The device is connected to your vehicle's CAN data network, and an individual PIN code is inserted using buttons that are already present on your vehicle. The system will not allow your car to start until this code is entered. This means that thieves are unable to duplicate the keys on your car or access the OBD port to gain access to your vehicle.

Ghost is a great option for all vehicles, including electric cars motorhomes, vans, motorhomes and bicycles. It's also extremely versatile and can be programmed to deactivate in a variety of situations. For instance, it could be programmed to enter Valet mode when the car is taken to a valet parking or a service provider. This means that your vehicle can be operated within a set 30mph speed limit, and the ghost immobiliser will activate itself when it is returned to your possession.

Another great feature is that the device can be reset to the personalized PIN at any time. This is a great option if you forget the code or in the event that the device becomes unusable.

It is also unnoticed by anyone who doesn't know what it is. This is because it runs through the buttons on your car's dashboard and steering wheel and uses the data they send to recognise which button has been hit. This makes it a safe and solid security system that is not able to be tampered through RF scanning or jamming, or even a door lock pick set.