16 Must-Follow Pages On Facebook For Fiat Panda Key Fob Replacement Marketers

Reasons Your replacement fiat 500 key fob 500 Key Fob Won't Work

A fiat 500 replacement key for fiat ducato van fob is a convenient way to open the doors and start the car. There are a myriad of reasons the fob may stop working. It could be due to a dead battery or damage to the receiver module, water issues, and interfering.

This listing is for a NEW replacement key fiat 500 Fiat Flip Key Remote - similar to the Ilco brand that needs to be programmed professionally by a local locksmith (click here to search for a Locksmith Search). This remote includes lock, unlock and trunk buttons.

Dead Coin Battery

The most frequent reason why your 500 key fob doesn't function is a dead battery. Modern key fobs only have only a limited range of operation and must be within a few inches of the vehicle in order to function. If you're not close to your vehicle when you press the key fob button, the car won't be able to respond, and will display the "Key Fob Not Detected" message in the instrument cluster.

If this happens, simply replace the battery of your coin cell (Part number CR2032) with a fresh one from a reputable brand such as Panasonic, Duracell, or Energizer. They are usually available in your local hardware store or online.

You can test the battery of your coin-cell by pressing the buttons while you are standing close to your Fiat 500. The car will blink its parking lights, and the key fob should operate the lock and unlock switches.

If the fob's remote doesn't work after replacing the battery, it may have water damage that stops it from communicating with the receiver module in your vehicle. Water damage can occur through a variety of methods, including a simple splash or submerging the key fob saltwater at the beach. If you think your fob was exposed to water, put it in a bag of rice to draw out the moisture. If this fails, you'll need to have the fob changed by an auto locksmith or a dealer.

Water Damage

Damage to the water supply can occur if you submerge the fob in the ocean, or wash it in a washing machine. Saltwater is especially dangerous to the circuit board of the fob that can cause it to short out and eventually end up dying. If you get the fob wet, it's not a good idea but if you accidentally drop it into an empty cup of water, or don't remember to take it out of your pants pocket before running the washing machine do not give up hope.

First take the battery off the fob. Before replacing the battery clean the electronic chip using isopropyl or a similar product. Next try the fob and verify if it is working. If the key doesn't work, it might need to be reset. This is usually done by a dealer or professional auto locksmith.

If the key you have is older and is not programmed for your car, you will need to replace it completely. This is an easy process that can be completed by a professional locksmith for automotive use. The locksmith will need the key cut to match the car's ignition. The locksmith will also have to reprogram your fob into the vehicle's system. It's a simple and affordable process that can be completed in the same day.

Receiver Module Issues

One of the most common reasons your 500 key fob might stop functioning is that it's out of range. The remote's range is of 30 feet. Therefore, if you are too far away from your vehicle it won't be able to respond to your commands. It can be solved by moving closer to your vehicle until it starts responding.

If your fob won't work after you replace the battery inside the coin, which is also called a "button", "watch" or "button", it may be due to a malfunction on the circuit board inside. Reprogramming the fob is usually the solution to the issue. You can find directions on how to do this for the majority of vehicles by searching YouTube or reading the owner's manual.

You may need to replace the metal clips that keep the battery of your coin in place. If they lose tension, it could prevent the battery from being properly seated and can cause your remote to malfunction.

In rare instances the fob might become disconnected from your vehicle due to software problems or hardware issues. This could cause a significant headache, but you can frequently fix this issue by visiting a local dealer or auto locksmith to reprogram your fob. In some cases they might need to reinstall the software on your body control module, too.

Interference

Interference can also cause the key fob not to receive or transmit the signal. This can occur when the keyfob is in close proximity to a radio transmitter, such as a cell phone or radar detector. The key fob may not function due to a bad connection with the buttons, water damage or damage to the internal chips.

If your key fob suddenly stopped working, or you've tried everything at home to resolve it (e.g. replacing the battery, reprogramming it and using the spare key fob, you might have a defective receiver module on your 500. The receiver module is located under the dash and is able to pick up the radio frequency signals from the key fob. It converts them into electronic commands that the vehicle interprets.

There is a simple way to reset the 500's on-board system including the keyfob. Disconnect the battery for 15 minutes by removing first the negative cable, then the positive cable. Reconnect the battery. This will eliminate any remaining electrical charge, and then restart the car's computer. This can help you get your key fob working again. If the issue persists, replacement key fiat 500 you should consult a certified technician. They will be able to identify the exact cause of any problems.