10 Meetups About Saab 93 Key Fob You Should Attend

How to Replace a Saab 9-3 Key

The Saab 9-3 is a fantastic car that offers a lot of appeal for drivers. It is powerful and has excellent visibility. It also has an excellent safety rating.

It is nevertheless important to ensure that you have at minimum two keys that are working for your vehicle. It can be costly to replace a key in the event that you lose it.

How to replace the ignition Key on the Saab 9-3

You'll have to replace your car key when it doesn't turn. This guide will walk you through how to do it on the Saab 9-3. You will need a replacement key with a reprogrammable battery and a brand new key-fob cover.

As opposed to earlier models, modern Saab vehicles use a transponder in the key-fob instead physical key to unlock and start the vehicle. The issue with this is that the reprogrammable battery in the key-fob will eventually wear out and lose charge any longer. This is particularly relevant if you continue to use the same key for the same lock.

The good news is that it can be replaced quite easily by an experienced locksmith. If you have the right tools, and a little patience, you can do it yourself. The first step is to remove the key-fob. This is accomplished by inserting a flathead screwdriver in the slot that is located in the middle of the case. The plastic is very thin and easily damaged.

After the case has been opened, you can prepare the new key by combining the lower half of the old key with the banana and transponder on the new key. This will ensure that the new key is properly mated to your CIM that can make a big difference when replacing the sole key for your Saab 9-3.

How to replace the ignition Key on the Saab 900

If you don't have two keys, you'll need to remove the steering wheel and dashboard for access to the ignition. Start by disconnecting your negative battery cable. After the battery has been disconnected, it is possible to remove the trim and dashboard pieces around the steering wheel. Once the dash is removed, you can insert an screwdriver through the hole at the back of the ignition switch and pull it out.

The ignition cylinder has a key lock that can prevent the vehicle from starting if the key isn't there. If your 900's ignition switch isn't functioning, check the key to determine if it's in the lock or snared into the barrel of the ignition. It's also a good idea to rotate your keys frequently and keep them clean so that one doesn't get bent.

Saab cars differ from other cars in the sense that they don't use traditional keys made of metal. Instead, the car is able to recognize the electric signals of the key fob through a special chip in it.

If you lose your sole working key fob the dealer will charge the highest dollar for the replacement of your computer module (known as the CIM). However, we can reprogram the existing computer EEPROM and prepare it to accept new keys without replacing it. This can save you over 50% of the cost the dealer charges! This is the SAAB KEY PROGRAM. Find out more information about it here!

How to Replace the Ignition Key on a Saab 9-5

The metal part of a classic Saab key is simple to copy, and it's also not much of a deterrent against theft of vehicles. The electronic portion of the key-fob is equipped with a chip that recognizes the car when the key is inserted in the ignition switch.

Saab has relied on the technology of this anti-theft system for over a decade. It's not as good as an actual lock on the door however it makes the theft of your car much harder. This is why every Saab owner should keep a spare key on hand.

Most new Saabs come with two keys at the factory, but you can buy more keys from an agent using a handheld computer referred to as a Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception to this is the NG 9-3 cars, with more modern, more advanced features that require keys-fobs.

The dealer will replace the CIM or TWICE module on those cars if the keys have been lost, and charge you a premium for this. We can reprogram your computer's EEPROM to accept new keys without replacing expensive modules.

How to Replace the Ignition Key in a Saab XC90

If your SAAB 9-3 key fob begins having issues turning the lock barrel it's possible that it's time to replace it. The procedure is fairly simple and doesn't require you to visit an agent. Instead you can do it yourself at home using a few simple tools.

You'll first need to prepare the keys for your new car. Before you begin, disable the anti-theft by placing blocks underneath the rear wheels and activating your handbrake. Then, you can put the key in the ignition and turn it to the ON position that activates the accessories, but it doesn't start the engine. Repeat this five times, then turn off the key in the "on" position.

You'll then have to buy a new case for your key fob. They can be found in most auto keys R us parts stores and are generally very affordable. You can get them without electronics, based on the model.

To open up the case, auto Keys R us insert an flathead screwdriver into the slot that is in the middle. Gently work it. The case should split easily, and once you've done that, you'll have access to the internal electronics. To remove the electronics make use of a small screwdriver and auto keys R us try to pry them out with a gentle force.