10 Autowatch Ghost Immobiliser Fitting Tricks All Experts Recommend
Ghost Immobiliser Installation
Protect your pride & joy from thieves by adding a ghost immobiliser. Our TASSA-certified system is safe from hacking, key cloning and vehicle immobiliser bypass.
The system is hidden in the wiring loom in your vehicle and ghost immobiliser installation is invisible to anyone who looks. It operates by creating pin code push sequences by using existing buttons on the steering wheel, door cards, and centre console.
No circuit cuts
It's not surprising that owners are keen to secure the vehicle they've put so much effort into buying. Traditional security devices, like alarms or wheel locks, are easily manipulated by thieves. A ghost immobiliser, on the other hand is a highly efficient solution that is silent and cannot be recognized by modern day thieves.
A ghost immobiliser fitting near me immobiliser is a hidden device that connects to the CAN data network of your vehicle to disable the engine without the use of radio frequencies or key fobs. It communicates with the ECU of your vehicle through buttons on the dash, steering wheel and door panels. This generates an individual pincode that is only accessible to you. The code can be changed at any point and can be up to 20 digits in length, based on what you prefer. It also comes with a safe emergency code that you can use if you forget your PIN.
The ghost immobiliser is useful to prevent the relay box inside your home from transmitting the signal of your car key, which could open the doors and begin your vehicle. It can also block advanced methods of stealing your vehicle, like OBD port hacking. The device is small, weatherproof and hard to spot. It's also difficult to tamper.
The ghost immobiliser has another benefit: it can be fitted to your vehicle without leaving permanent marks. It is ideal for those who plan to sell their vehicle in the near future. It is also much quicker and simpler to install as than a factory-fitted unit.
The Autowatch Ghost, a groundbreaking technology, is a new generation device that prevents thefts from cars that are not connected to a vehicle's CAN network and using the buttons to generate an unique PIN code. It is a devious device that can be set up without severing any wires and requires no additional key fobs. It can also be connected to the original ECU of the vehicle, which prevents thieves from by stealing it using a new key. This system has been verified by TASSA and is compatible with an International Security Register. Owners will be able to rest easy, knowing that their vehicle is secured from theft.
No RF scanning
If you have invested an enormous amount of time and money in the customization of your vehicle, you'll want to safeguard it from theft. Installing an immobiliser is one of the most effective ways to avoid theft. It will prevent your vehicle from starting until you enter an individual code. Using the buttons on your steering wheel and dashboard, you can generate a PIN up to 20 digits in length that is only known by you, making sure that only you are able to drive your vehicle. You can also set up a valet or service mode that will allow you temporarily to start your car without entering the PIN code. This will allow the technician to work on your vehicle without you being present. This feature is great for those who want to reduce time and simplify their lives.
A ghost immobiliser, a new generation device, connects to the CAN data network of your vehicle. It uses the buttons located on the dashboard as well as the steering wheel to program a PIN code. It is designed to blend into, as it does not emit any noise or LED indicator. It can be placed anywhere on your vehicle without impacting the appearance of your vehicle.
This stealthy device has been approved by TASSA and could lower the cost of insurance. It has a tracking feature that allows you to locate your vehicle even if it's gone missing. This is particularly useful if have a costly or rare vehicle that you have invested lots of time customizing.
Autowatch Ghost, in conjunction with the iPhone application, allows you to remotely start your vehicle if you have forgotten your PIN or are not able to enter your vehicle. This feature is ideal if you have to go on errands or pick up your kids, but do not want to risk having someone else drive your car. It's also useful if you need to take your vehicle to a mechanic for maintenance or repair.
The Ghost is unique in that it doesn't transmit or detect radio frequencies and is therefore undetectable by thieves who employ RF scanning and code grabbing technologies. It is also able to protect your car against key cloning and ECU swapping which are the most common methods of car theft.
No key to cloning
Ghost immobilisers can be an excellent way to safeguard high-end cars and prevent key duplicates. They prevent your car from being started until a PIN code has been entered along with the regular key fob. This makes it extremely difficult for thieves to steal your vehicle, and may stop them from trying it initially. This is an especially good option if you've invested an enormous amount of time and money in personalising your vehicle or have a unique or expensive model.
These immobilisers connect to the vehicle's CAN data network and are completely hidden, which means there is no visible indication of its presence in the vehicle. It is also difficult to identify by using radio frequency scanning technology or code grabbing. This means that a burglar would need to take longer to steal your vehicle.
A thief will need to be aware of the unique pin sequence and the location of the ghost in order to avoid it. However, the pin code will be specific to you and can be changed as many times as you'd like. The pin code is easy for you to remember but mathematically unattainable for someone else to work out. In addition, the engineer will have provided you with a backup PIN code to override if you forget the pin.
The Ghost CAN bus immobiliser is weatherproof and easily installed in any part of your vehicle. It is compatible with all vehicles and fully customisable to match the style of your vehicle. It is also extremely affordable and easy to use. You can even transfer the device to another vehicle if you change vehicles during the course of ownership, as long as the new vehicle is compatible with the.
The immobiliser on the CAN bus is compatible with a number of other security features. It is able to, for instance detect damage to the vehicle and alert the owner. It could also shut down the engine if it detects that the car has been tampered with. It also helps protect your vehicle from key cloning and hacking. It also detects vibrations and contact with the vehicle. In addition, it could notify the owner that the vehicle has been moved.
No OBD port hacking
Ghost is an immobiliser hidden in the module that is connected to the CAN data network in your vehicle which stops thieves from gaining access to your vehicle to disable the alarm, or deactivate the key fob, and then code new keys. This technology is a step up over the methods that were used by thieves to steal vehicles in the past. The CAN data network also means that your system won't be affected if you disconnect or change your battery.
The Autowatch Ghost is the first aftermarket CAN bus non-detectable immobiliser that protects against key-cloning, hacking, and replica car theft. It does not use LED indicators or key fobs. Instead, it utilizes the buttons on your steering wheel, console and door panels.
Modern thieves can employ diagnostics to find circuit breaks on your vehicle. They can bypass immobilisers which require a lot of wiring or are integrated into the wiring. The Ghost is weatherproof and doesn't require any additional wiring. It cannot be identified by diagnostic tools that are professional. It can be used on vehicles equipped with anti-theft systems.
Another major benefit of a Ghost immobiliser is that your vehicle can only be started by a person who has the PIN code and has physical access to your vehicle. This is a major advantage over traditional security systems which can be bypassed with simple cable alteration, a screwdriver or the utilisation of an universal remote controller.
You can easily reset your PIN in case you forget it by using the emergency PIN override feature on your mobile or computer. This is a great option if you need to start your car after it's in a garage or a valet parking service.
The Autowatch Ghost 2 is the most recent version of the product and is insurance approved by TASSA when installed by one of our authorised installers. It features a QR fingerprint system to identify specific parts, which allows for the return of stolen items if they are found. It can also be set to'service mode', which allows the engine to be started when your vehicle is parked in a garage or if you have valet parking, however, you must enter your PIN code once more to exit the vehicle.