20 Rising Stars To Watch In The Repairs To Upvc Windows Industry

Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are easy to maintain and are durable and long-lasting. They do not rot or rust like aluminum and timber.

It is important to clean and oil UPVC doors and windows on a regular basis. This will reduce unnecessary repair costs and also improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows can cause significant damage to your home and may even be fatal. It is essential to ensure that your windows are in good shape.

For single pane windows, it is fairly easy to replace them, and the replacement is usually able to fit into the old frame very easily. However, if you have double-pane windows that are secured by internal beading, it'll be more difficult to remove the old panes and put in new ones. In this situation you'll need to locate some plastic spacers to aid the new pane in being able to fit correctly into the frame of the window.

If you are going to attempt to remove the window panes by yourself, it is essential to wear the proper safety gear, including thick gloves and protective eyewear. You should also lay down a drop cloth before you begin working on the window panes so that any shards of glass fall onto the fabric and not onto the floor and could be trampled.

It's a great idea seal the gap after the glass is removed. This will prevent water and drafts from entering your home until a professional arrives to repair the window. This will also provide a barrier to prevent any intruders from making their way into your home. If the gap is large, you may want to consider using an alarm door that comes with an integrated window as this will offer the best of both worlds.

2. Sagging

Upvc windows and doors are a low-cost, durable and energy-efficient alternative to timber sash windows. In time, they could develop a variety of issues such as sliding. A window that isn't properly aligned can cause problems with light, draughts or even security. It's crucial to act immediately if you realize that your uPVC windows are sliding.

To fix a window that is sagging you can try repositioning the hinges. First, you'll need to unblock the windows so you can reach the frame. Then, you can remove the hinges on the top and bottom with a screwdriver and adjust them counter-clockwise or clockwise. Close your window to check the fit after you've relocated your hinges. If you're satisfied with the fit, you can tighten the screws until they stay in place.

If you can't reposition the hinges you may require replacing the seal. As time passes, rubber seals lose their elasticity and become dry which causes them to loosen. It is crucial to replace your seal as soon as you can in order to ensure that your uPVC window waterproof and draughtproof.

UPVC handles can also become loose. This is often caused by screws that have become undone over time, but it can also be due to the handle mechanism getting worn out. Luckily, it's not difficult to repair the loose uPVC window handle yourself. First, you'll need to close your window and do a test to ensure that it fits. The corners of the sash must align with the casing joint. If it doesn't, you can use a screwdriver to loosen the handle and turn the mechanism back into position.

3. Water Leaks

If you awake to wet floors and damp walls each time it rains, it is important that you take action. Water leaks through windows can cause structural damage to your home and affect your ability to regulate the temperature in your home. The most common cause for leaks in uPVC windows is that the sealant surrounding the frame has been damaged or not present.

This is a relatively easy fix that can be done by any skilled DIYer. Depending on how serious the issue is, the old caulking might need to be removed. It is important to keep in mind that when it comes to uPVC window repairs you should not be tempted to apply too much caulk and then make the area harder to clean and could decrease the efficiency of your energy usage.

Make sure that the drainage holes have no debris inside them and ensure that the sill pan is properly angled to drain away from the window. In more severe cases, you may need to replace the window.

Mold spots and rotted sills are another sign of water leakage. The fungus thrives in damp conditions and is able to quickly spread throughout the house.

If the leakage occurs between the double-glazed window, it is more likely the issue is more related to the seal, not the frame. A upvc window repairs specialist can fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or loose and blow open with ease, it may be hinges that are at fault. Any competent DIYer can replace these in a matter of minutes.

Almost every household in the UK will have top-hung or side-hung uPVC windows that are hinged and like any mechanical part they are susceptible to wear and tear over time. It's very simple to replace a hinge on a window but it's much easier if someone helps you to hold the frame.

Check that the uPVC hinges open and close in the proper direction. Look for the arrows on each hinge to determine the direction in which the window should be opened.

The issue could be caused either due to opening the window in the wrong way or a faulty installation in the factory. This issue can be fixed by sending us a photo via our website and we will be happy to give you advice.

It is also essential to ensure that the hinges are lubricated on a regular basis. This can be accomplished by applying an oil that is light in nature to the hinges, we recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also lower the possibility of a window sticking and help prevent corrosion. This must be done at a minimum once a year. WD40 and other solvent-based lubricants are not recommended as they can damage your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by a variety of various factors. First, the hinges due to wear and tear can become misaligned, this will cause a gap to form where the sash joins the frame. These can be easily repaired by giving them good clean, but when they're beyond repair, it may be necessary to get them realigned or replaced. The second is the interlock, which is located on the hinge side of the window and can also be misaligned, and again it may be feasible to give them a thorough clean, however in some cases it might be necessary to get them replaced.

These seals are susceptible to wear and tear or be damaged over time, allowing air to escape. Replacement of these with high-quality weatherstripping is a good way to stop draughts. Another alternative is to replace the upvc window with low-emissivity glass. this will help in regulating indoor temperatures and again will reduce the possibility of draughts.

Another, and most effective ways to reduce draughts is by using a draught excluder, these are typically made of fabric that are filled with some kind of filler. They can be put on the windowsill on top. They can help block out cold air and keep your home warm and cozy!

With a bit of regular maintenance and repairs windows made of upvc will continue to provide an excellent level of security and insulation for your home. It is important to remember that all windows eventually get worn out and it is more cost-effective to replace them than to repair them. So, if you are experiencing issues with your Upvc windows, it is best to seek professional assistance as soon as you can.