How To Outsmart Your Boss Upvc Window Handle Replacement

UPVC Window Handle Replacement

Replacing a damaged window handle is a relatively easy process, and, with the right tools, it can be done quickly. It's important to identify the kind of handle you have and its spindle size before purchasing the replacement.

Older uPVC windows have handles with cockspurs, which have an extension spur that can lock over a cockspur wedge striker plate. These can be either left or right-handed and must be to match when replacing.

What type of lock and handle do I need?

There are a variety of upvc window handles and locks, each having their distinct advantages and functions. The type of handle you own will determine whether or not your locking mechanism is efficient and also if it is simple to open the windows. With time and regular use the upvc handles that are on your windows can get worn out and damaged. This makes them less secure and less effective. In some cases, they may even be completely removed. It is important to repair your window handles made of upvc as soon as you begin to notice them falling off. This will prevent possible break-ins and will keep your home secure.

It is a good thing that replacing your window handles made of plastic is a relatively simple task that can be completed by nearly anyone. You'll require some basic tools, but with proper knowledge, it's simple and should only take a couple of minutes. To get started you'll need to determine the type of handle and lock you have on your window made of upvc and then find the perfect replacement.

Inline Espagnolette Handles

They are usually found on the side of the window. They are flat and feature a latch which engages the locking mechanism of the window frame. Inline upvc handles have a spindle that runs through the middle of the handle to the window frame in order to control the latch.

Cockspur Handles

These handles are typically located on older uPVC windows and have an distinctive hook-shaped design. Cockspur handles are secured to the frame of the window by one screw, and are less secure than other kinds of glass window replacement handles.

Tilt and Turn Handles

The tilt and turn handles differ from other handles made of upvc in that they can be turned for opening the window, and then lowered into the window to allow air circulation. They typically have a 7mm spindle at the side of the handle. They are available in both left and UPVC Window Handle Replacement right handed versions.

It is crucial to determine the spindle size when buying replacement upvc handle. Not all are exactly the same size. To determine the length of your upvc handle simply drop something in the middle of the hole, and then measure the distance it travels before it reaches an obstruction. This is the largest spindle size that will fit in your windows.

What is spindles?

uPVC window handles work similar as doors, with the user turning the handle to open a latch inside the frame. The window then opens and closed. The handles can become damaged, especially if used frequently or subjected to harsh conditions. This can leave you needing to replace your uPVC windows handles as they may not be able to operate the window in a proper manner for a long time.

There are a variety of uPVC handles available including Espag, Cockspur and Spaded handle options. These handles are designed to fit into the uPVC frames in different ways and each handle type uses a specific spindle to lock the mechanism to the window. This is why it is important to identify the type of handle you have on your uPVC window to get the correct replacement for it.

You can find out what kind of uPVC handle you have by taking a look at the base of your handle. A snap-in covers should be over the screw that holds the base of the handle in place. When you remove this cover you will be able to see the second screw that holds the handle base in place. Once both screws have been removed then you should be able to pull the handle from the uPVC.

Once you have removed the uPVC window handle, you will need to carefully unscrew the spindle you have removed from the locking mechanism. Take note of the length of the spindle. You will need to purchase a replacement with the same length as the original handle and locking device.

The spindle wears down and is unable to operate the locking mechanism. This can be due to damage from constant use, a loosening of the locking mechanism, or even corrosion that occurs over time. If this happens, you will have to replace both the window handle and the locking mechanism in order to restore the full functionality of your uPVC Windows.

How do I get rid of my old handle?

Through time and regular usage, window handles could become damaged or broken and if this happens, it is essential to fix them as soon as you can to ensure the security of your home. It is easy to replace a worn or damaged handle. The job can be accomplished in under a minute without the need for any special tools.

The first step to remove the handle that was previously used is to take off the screw situated on the top of the handle base. Once the screw is removed, the handle can then be pulled away from the base. There is another screw located at the bottom of the handle's base and it is able to be removed too. Once both of these screws are removed, the handle can be removed completely from the base portion of the window.

After removing the handle and fixing holes, align the holes of the new handle with the holes that are already in the window frame. There may be a little sticker or caps on the new handle, so remove them if needed and then screw the handle in place. It is crucial to verify that the handle is working after it is put in place. Turn the handle and make sure that the lock mechanism is activated.

Espag handles feature a spindle which protrudes from the handle and slots into the multipoint locking mechanism of the frame of the window. Cadenza double glazed windows replacement come with a blade with cutouts that fit into the lock mechanism. Cockspur handles are long and are hung over the frame that surrounds the window or the transom crossmember of the bar.

Once you have installed the new handle, slide the spindle inside the window lock and tighten it. Replace the snap-in cover and screw cap (if appropriate) once the handle has been firmly fixed. Now that the handle is in use, simply open and close the window a couple of times to make sure it is working properly and securely.

How do I install the new handle?

Changing your uPVC window handle isn't difficult and the process is simple. All you need is a screwdriver and a small amount of patience. The first thing to do is to ensure that the handle is not locked and then remove any screws that are visible, you can also replace these with screw caps if needed. After you have removed the handle, you will need to note the length of the spindle that extends from the back. This is important as it will determine what type of handle you need to buy.

Espagnolette handles on uPVC are the most sought-after kind of handle. The spindle passes through the handle to activate the locking mechanism in the frame of the window. When the handle is turned it opens the latch on the window and allows it to open. With time and regular use, espagnolette handles may be damaged or damaged which is why it is essential to find replacements.

Cadenza handles are a type of uPVC handle that is commonly used with tilt and turn windows. They have a protruding knife that is operated by a multi-point locking mechanism inside the window. They are more secure than an espagnolette handle as they can only open from the inside. You can replace them with the same method as you would with espagnolette handles however, ensure that the new handle is angled and not flat.

Once you have determined the right handle to purchase You can simply line up the new handle with the existing screw holes and then screw it in the appropriate position. Then, put the screws on and test your new handle. You can do this by dragging the handle back and forth from the locked position to the unlocked for a few times. If you have any issues, it may be worth contacting a specialist to see if they are able to help resolve the problem. They will often be able to guide you on the best way to resolve the issue in a speedy and efficient manner.