How To Solve Issues With Car Ghost Immobiliser
Autowatch Ghost 2 Immobiliser Cost
Ghost 2 is a new technology that can stop theft of vehicles in two ways. It prevents the cloning of existing car keys and stops thieves from starting the vehicle. It communicates with the ECU through buttons on the dashboard or steering wheel.
It's undetectable and can't be hacked or detected by diagnostic equipment. It also requires a unique PIN code that only the owner knows.
Cost
The loss of your vehicle isn't just a source of distress and annoying, but the cost of replacing or repairing your car could be costly as well. With this in mind, it's important to consider a security solution to protect your vehicle from being taken. One alternative is a Ghost immobiliser, which works by preventing your car from starting unless the appropriate sequence of keys is pressed, similar to how you input the password on your phone.
This device can help you save money on your car insurance by protecting your vehicle from contactless theft. Many insurance companies realize that these devices are a great protection against thieves and therefore will offer lower rates on your car insurance.
The Autowatch Ghost ll is a discrete immobiliser that is fitted in your car without causing any harm. It does not require any additional components and works by using the buttons in the factory to generate an unique PIN code. The Autowatch Ghost-II is a more advanced version of the Autowatch Ghost that is designed to protect against key cloning, hacking, and vehicle swiping.
It is possible to disable the Ghost immobiliser, but this would require sophisticated equipment and knowledge of how to use it. In addition to this, it would be very difficult for thieves to determine the exact sequence of buttons required, so the device can be easily used by you and other people.
Another alternative is an alternative is the Autowatch Ghost ADR, which can be programmed and fitted by a certified installer at Just Jeeps. This unique immobiliser doesn't work with the standard CAN bus protocol and is not able to communicate with your engine control unit (ECU). This means it isn't altered and will only be launched when the ADR App is turned on and within the distance of the car.
The Autowatch Ghost ADR is compatible with your smartphone to provide you with a complete security solution. It utilizes the smartphone's GPS to identify your location, and will even notify you when the vehicle is moved or turned off when it is in a public parking lot. It is also able to locate the vehicle in case it is stolen, and to send a message to thieves via your phone that the vehicle was reported.
Benefits
A ghost immobiliser system is an effective method to safeguard your vehicle from theft. It stops your vehicle from starting until the PIN code is entered. It is inaccessible to modern thieves using diagnostic tools because it doesn't block radio signals, making it a highly secure form of security. It can be used to prevent key cloning or hacking. This makes it much more difficult for thieves to steal your vehicle. It is an excellent choice for those who have put in an enormous amount of money and time into customizing or maintaining their vehicle.
In contrast to physical anti-theft devices such as steering wheel locks or wheel clamps, ghost immobiliser price is discretely placed inside your vehicle and is impossible for thieves to spot. It makes use of buttons that are already present such as those on the steering wheel or door panels, or the centre console to create an individual, customizable PIN code sequence that must be entered before the vehicle is able to start. You can also make the sequence as long as 20 presses.
This technology is extremely simple to use and does not require any additional hardware to work It works by integrating with the CAN data bus that is in your vehicle. It is undetectable to thieves using diagnostic tools because there are no missing radio signals, and is totally silent when it is in operation. It is also not affected by the use of jamming or spoofing devices since it doesn't transmit any data to the original key remote fob.
The Autowatch Ghost 2 offers a high-end device for protecting your car from key theft or key cloning as well as hacking. It is an effective deterrent to thieves and can be deactivated with a mobile application from your smartphone or a Bluetooth Tag that connects to the Ghost 2. It is easy to install, and comes with an instruction manual along with an emergency card and two Autowatch window stickers.
Ghost 2 is the latest generation of CAN-bus immobiliser technology, which provides absolute security without the need for any unsightly wires or additional key fobs. It is undetectable, and generates a unique number of codes using your existing buttons. The code must be entered to begin the vehicle. It can also monitor your vehicle for any damage or vibrations and will send an emergency PIN code to the owner's mobile phone when it's been played with. It also works with a range of GPS tracking systems and works with a variety of applications for greater convenience.
Installation
Designed to combat recent car crimes using keys of the owner, our brand new Autowatch Ghost 2 immobiliser prevents theft in two ways. It prevents your vehicle from being copied and it also prevents your vehicle from being driven or even started when the security pin has not been entered. Unlike traditional car alarms & key fob remote systems that can be hacked or removed from your vehicle this system is built directly into the CANbus system of the vehicle. It is completely undetectable and will not interfere with existing technology in vehicles.
This is the only aftermarket CAN Bus immobiliser that does not require an additional control or part replacement in your vehicle. Instead it uses the existing buttons on your vehicle (such as the ones on the steering wheel doors, door panels or the central console) to make an unique, changeable pin sequence up to 20 presses long. This unique PIN must be entered before the engine can be started. The system is completely silent, and there aren't any LED indicators to indicate that the system is in your vehicle. It also doesn't transmit radio signals like a standard car alarm and is therefore inaccessible to modern thieves who employ diagnostics or look for the distinctive clicking sound of the usual relay style immobiliser.
The Autowatch Ghost immobiliser communicates with the vehicle's ECU via the CAN data circuit. This is wireless communication, therefore no wires or components are needed. It is also unnoticeable by anyone who does not have access to the CANbus system of your vehicle. This means that the system will not interfere in any way with your vehicle's operation regardless of whether it is utilized as a standard system or as an aftermarket model.
The Autowatch Ghost is the smallest system of its kind, measuring only 1.3cm in length. It's installed during the service or valeting process by one of our experienced technicians. It is fully covered by TASSA, and it is not affected by professional thieves employ methods like RF scans, spoofing, or code grabbing because it does not rely on radio frequencies. This makes it one of the most technologically advanced and cost effective security solutions available today.
Removal
The Ghost Immobiliser stops thieves from starting your vehicle. It works by sending a discreet sequence of pin codes to existing buttons in your vehicle. This makes it completely invisible to anyone who comes inside your vehicle, making it a highly effective deterrent for car criminals. It also incorporates the feature of a silent engine lock, which blocks your vehicle from being driven. It isn't able to be hacked by criminals using diagnostic tools to copy keys or hack the system.
The system also blocks signal jamming and device spoofing, the most common methods thieves employ to bypass immobilisers that are standard. This makes it much more difficult for thieves to steal your vehicle and can even reduce your insurance premiums.
Ghost is the original CAN bus immobiliser aftermarket. It protects your vehicle from key cloning, hacking, and key theft like no is available in the market today. It makes use of the buttons on your vehicle, for instance those on the steering wheel or door panels, to generate a an individual, custom-designed, and variable PIN code sequence that can run up to 20 digits in length. You must enter the sequence before you are able to start your vehicle. There is also the option of a service mode that lets you temporarily start and drive your car without the need for a PIN code.
It's worth investing in this technology when you've spent a lot of money and effort customising your vehicle or have an expensive or rare vehicle. The Ghost immobiliser is a non-visible secure device that is impossible to remove by the average car burglar. Plus, it leaves no trace of instillation, meaning that the appearance of your vehicle will not be affected.
The Autowatch Ghost is a tamperproof immobiliser that connects to your vehicle's ECU and communicates with it via the CAN Data circuit. The system is completely quiet, meaning thieves cannot hack it to disable it like they have done in recent years with other systems such as OBD port hacks. It is also unrecognizable by any diagnostic equipment that a thief might have because it doesn't emit radio signals.