The Ugly Real Truth Of Fiat Panda Key Fob Replacement

Reasons Your Fiat 500 Key Fob Won't Work

A key fob for Fiat 500 allows you to easily open doors and start your vehicle. There are a myriad of reasons why the fob won't be working. This could be due to a dead coin-battery water damage, issues with the receiver module, and interference.

This listing is for a NEW replacement fiat 500 key fob; Qooh.me, Fiat Flip Key Remote that looks like the Ilco brand. It must be professionally programmed (click here to find local automotive locksmiths). Includes trunk, lock and replacement fiat 500 key fob unlock buttons.

Dead Coin Battery

A dead battery is the main cause of your 500 key fob that isn't working. Modern key fobs have a very restricted operating range, and should be within some feet of the vehicle to function. If you're not close to your vehicle, and you press the key fob button, the car will not respond, and will display an "Key Fob Not Detected" message in the instrument cluster.

If this happens then replace the battery for your coin-cell (Part Number CR2032) by a new one of a trusted brand like Panasonic Duracell or Energizer. They are available at your local hardware store, or on the internet.

After you've changed the battery on the coin cell It is possible to test it by standing near your Fiat 500 and pressing the buttons. The parking lights will flash and the key fob will operate the lock and unlock switches.

If your key fob still isn't working even after replacing the battery, it may be water damage which prevents it from connecting to the module inside your vehicle. Water damage can occur through a variety of methods, including an easy splash or submerging the key fob into saltwater at the beach. If you suspect that your fob has been exposed to water, put it in a bag of rice to draw out the moisture. If that doesn't work your fob may need to be reset by a professional auto locksmith or the dealer.

Water Damage

While the fob comes with rubber seals to keep water out of the electronic chip inside the device, replacement fiat 500 key fob submerging it into the ocean or washing it in a machine could cause water damage. Saltwater can cause the circuit board to short and eventually end up dying. It's not good where to get a fiat key cut let the fob get wet however, but don't give it up if you accidentally drop it in water or forget to take it out of your pants pocket.

Remove the battery first. Before replacing the battery clean the electronic chip with isopropyl or a similar product. Next test the fob to verify if it is working. If the fob doesn't function, it may need to be reset. This is usually done by an auto locksmith or dealer.

If your key is a bit older and is not programmed for your vehicle You will need to replace it completely. This is a straightforward process that can be handled by a professional locksmith for automotive use. The locksmith will need the key to be cut to match the car's ignition. They'll also need to reprogram the fob to the car's system. This is a cost-effective and fast process that can be completed on the same day.

Receiver Module Issues

Your 500 key fob might not function because it's out of range. The remote has a maximum range of 30 feet, so in the event that you are far away from your vehicle it won't be able to respond to your commands. You can solve this problem by moving the remote closer to your car until it responds.

If your fob isn't working after replacing the battery inside the coin, which is also called a "button", "watch" or "button" It may be due to a malfunction on the circuit board inside. Reprogramming your fob can resolve the issue. You can find the instructions for most vehicles on YouTube or in the owner's manual.

You may need to replace the metal retaining clips that keep the coin battery in place. If they loose tension it can prevent the coin battery from sitting properly, and this will cause the remote to malfunction.

In rare instances, the fob might be out of sync with your vehicle because of hardware or software problems. This could be a huge problem, but you can frequently fix this issue by visiting a local dealer or auto locksmith to reprogram your fob for you. In some instances it is possible that the software will need to be reinstalled in your body control modules.

Interference

In addition to a dead battery on a coin, the key fob may not be able to receive or transmit the signal due to interference. This could occur if the keyfob is in close proximity to a radio transmitter, like a cellphone or radar detector. Other reasons the key fob could not function could be due to a weak connection to the buttons or the internal chip or water damage.

If the key fob failed to work one day in the middle of the night or even after trying every option at home to fix it e.g. replacing batteries, reprogramming or using the spare key fob, you might have a defective receiver module on your 500. The receiver module, located under the dashboard, detects radio frequency signals from your key fob. It converts them into electronic commands that the vehicle interprets.

There is a simple way to reset the 500's on-board system, including the keyfob. Disconnect the battery for 15 minutes by removing first the negative cable and then the positive cable. Reconnect the battery. This will eliminate any remaining electricity and restart the car's computers. This can help you get your key fob working again. If the problem persists you should consult an expert technician. They'll be able determine the exact cause of your problems.