Three Greatest Moments In Defra Approved Back Boiler Stoves History
Defra Approved Back Boiler Stoves
When selecting a new stove there are a variety of things to consider. The attraction of dual-functionality is only one of the many factors to consider.
DEFRA approved back boiler stoves offer an excellent solution to these problems. They emit only a tiny amount of smoke because they require the smallest amount of combustion air.
Clean Burn Technology
A defra-approved back boiler is a great option for those who want a stove that is clean burning and can provide heat to your home as well as provide hot water to radiators. The stoves come with an integrated steel boiler that can be used for heating your central heating system whilst the fire is burning inside the stove, meaning it's a far more efficient method to use wood burners.
The majority of our defra-approved back boiler stoves have a heated, airwash system to keep the glass doors free of ash and soot. The secondary combustion system re-burns any unburnt particles created during the initial burning. This helps keep the flue gas clean which results in more efficient burning process and lower cost of fuel.
Some of our stoves are more eco-friendly and have been independently tested to ensure they meet the new, stricter defra list stoves (Telegra.ph) emissions standards to be 5kw defra multifuel stove SE (Smoke Exempt) approved. The stoves accomplish this by having an air vent at the top that stops you from closing it completely and thereby cutting off oxygen supply to the flame. This causes the fire to smoke instead of burning properly and release more pollutants into the air.
The moisture content of the fuel could be a significant factor in the amount of smoke that is emitted from the stove. We recommend that you burn dry, seasoned wood with a moisture content of less than 20% to ensure your stove is burning as efficiently and as efficiently as it can be. Most of our Defra-approved stoves have a built-in moisture sensor which will alter the amount of heat burned when burning wet wood.
Some manufacturers have gone a step further to increase efficiency by adding a secondary clean burn system. This is controlled by a chrome lever at the bottom of the stove. It opens and closes an air vent that draws air over the fire, and then reburns the smoke that was created from the initial process of burning. This makes our Defra SE approved stoves even more efficient, which means you can save even more money on your energy bills.
Easy to Clean
A defra-approved back boiler stove allows you to run your central heating and hot water through the same system. This can be accomplished by making a loop that connects the other taps on the back boiler (there usually are two) and your hot water tank. You can then utilize thermosyphoning to bring heat into your home. This also means that your boiler will never run out of hot water, because it is fed from the tank.
To keep your stove operating at its best performance, you should clean it frequently. Begin by making sure that the stove is cool to the touch. Next, wipe down the main body of the stove as well as the door with a clean and dry cloth. We recommend using a microfiber cloth since they are less harsh.
After you have cleaned the inside of your stove It is a good idea to clean the glass. Glass cleaners are readily available in a variety of hardware stores and will help remove stubborn marks and stains. Glass cleaners should be used with caution as too much can cause damage to glass surfaces.
As time passes, the seals that surround the doors of your stove and the glass can begin to deteriorate. This can cause gaps which can leak heat, so it is important to replace these seals every annually. Depending on the model that you choose, this can be done quickly and easily with stove rope which can be purchased from many hardware stores.
If you have an Eco Design 2022-compliant back boiler on an approved defra stove the combustion process will be much more efficient than traditional wood-burning stoves. This is because the latest technologies have reduced the amount of part-burned combustibles that release into the atmosphere. This has made stoves that comply much more environmentally friendly and are also less expensive to operate.
Another thing to keep in mind with a back boiler stove is that it is always a bit more expensive than a standard multifuel stove because it will produce more hot water than a typical multifuel stove. However, it's a very economical way to heat your home, since you can run both your central heating and hot water from the same system.
Easy to Install
Boiler stoves are fashionable and efficient option that can provide hot water and DEFRA list stoves heat for your central heating system. A wood burner that has a back boiler is different from other multi-fuel stoves that must be connected to the gas boiler. It is able to connect directly to the central heating and hot water of your home, eliminating the need for a separate heating system.
A wood-burning stove with a back boiler can also be used to power your heating system entirely using renewable energy sources which makes them an green option over other stoves. They also produce fewer emissions, as they burn logs or pellets, than gas or oil heating systems which makes them a good option for those concerned about global warming.
Installing a wood-burning stove with a boiler is fairly simple. It is crucial to ensure that the stove is properly installed and is connected to your heating system. This should be done by a qualified heating technician. They can make sure that your stove is set up correctly and connected to the appropriate systems. They can also make sure that all safety devices are installed.
Defra Approved stoves or Defra Exempt Stoves as they are often referred to and have passed the Department of Environment, Food and Rural Affairs (DEFRA) requirements for smoke emission levels. They can be used in Smoke Control Areas. They have been modified and tested to ensure that they create a very efficient burn and can be used with smokeless or wood fuels.
As such, DEFRA approved stoves, like the Defra Exempt Dunsley Yorkshire and our top-selling Hi-Flame Aidan can provide an extremely efficient combustion process with very low harmful emissions. They have been tested in accordance with the new Eco Design regulations that impose limits on the amount of particulate matter as well as NOx, CO2 and organic gases that the stove will produce in its normal operation.
Smoke Control Areas Suitable
Smoke Control Areas are in place in all UK cities and towns. Burning wood on old fireplaces or stoves could result in a fine if the smoke is deemed to be an issue. The good part is that Defra-approved back boiler stoves aren't subject to these restrictions if you choose the right appliance for your home.
The Defra exempted wood burners are engineered to use Clean Burn technology which ensures that any fuel burnt efficiently and with minimal smoke production. You can still enjoy a beautiful fireplace if you reside in an area that is smoke-free, however logs should be restricted to smokeless mineral fuels.
These stoves meet Defra standards due to their airtight chambers controlled by airflow. They also employ triple airflow systems, which ensure that combustion byproducts are burned up before they escape the chimney. This helps not only keep any unwanted smoke out, but also helps to reduce soot build up which can block the flue and reduce the efficiency of gas.
It is crucial to buy a Defra-approved, Defra-certified stove from an Expert Local retailer who can make sure that the proper size stove is selected for your area to ensure maximum heating efficiency and is properly installed by a registered HETAS installer. They can also help you with choosing the best type of chimney liner to ensure a secure and efficient installation. They can also advise on whether your house requires additional ventilation.
Modern DEFRA approved back boiler stoves are a far cry from traditional open fires and traditional wood burners, and you can expect at least 75% heat efficiency that will not only save your money, but also reduce the environmental impact. Defra approved back boiler stoves can be used in smoke controlled areas and require at least 6mm of stainless twin-wall chimney liner made of steel. This is cheaper than the more substantial 12mm liners required for Ecodesign stoves.
If you are in any doubt about whether your property is located in a smoke control area, consult your local council who will be able to give you the most current information. Most reliable stove manufacturers have a dedicated Defra exempt section of their range so that you can easily identify these appliances when you shop.