What To Say About Ghost Immobiliser 2 To Your Mom
Ghost Immobiliser 2
Secures your vehicle from key cloning and stops thieves from driving your vehicle with original keys. Our latest immobiliser is connected to your vehicles CAN data network & a unique PIN code must be entered in order for the engine to begin.
Ghost, unlike trackers, does not emit radio frequency signals, and therefore cannot be identified by diagnostic tools. Ghost does not have LED indicators or buttons that could indicate its presence in your van or car.
Anti-key cloning
The audi rs4 ghost installer (This Web site) immobiliser has been designed to stop key cloning and hacking. This device is connected to your vehicle's data network CAN and creates a unique pin number using the factory buttons in your dashboard and steering. This will stop the thief from being able to start your vehicle. If the incorrect PIN code is entered, your engine cannot be started and it will be impossible for them to drive away with your pride and joy.
Ghost immobilisers employ new technology that is extremely difficult for thieves to beat. In contrast to physical deterrents such as wheel locks and steering locks which can be cut or jacked the ghost immobiliser is a discrete electronic device that isn't easily detected by regular thieves because it doesn't emit any radio signals and is completely silent.
The new generation of immobiliser is able to protect your car from a myriad of threats like key-hacking, cloned keys and relay attacks. It also has the ability to stop the thief from adding the new key or replacing your ECU by ensuring that it does not allow the car to start without entering the correct PIN code before entering.
In contrast to other immobilisers the ghost immobiliser 2 does not require any additional key fobs or remotes for operation. It is deactivable by using an app on the driver's smartphone. This is perfect for when you have to hand your car to valet parking, or for servicing without the key fobs.
The Autowatch Ghost-II represents the latest version of the Ghost immobiliser. It is designed to be easy and convenient to use and yet be as secure as it can be. This is accomplished by integrating the Ghost-II with the vehicle's CAN data network. This means that there are no wires that could be concealed or easily spotted. It also features a built-in feature that allows you to disarm your Ghost-II by connecting it to the vehicle's Bluetooth, so you can get in and drive, hassle free.
OBD port hacking
OBD port hacking is the latest method used by professional car thieves. Thieves have access to your vehicle's OBD port with no more than a laptop, an app and a few cables, which can be purchased online for less than PS50. Once they have access, they are able to do whatever they want including resetting your vehicle's fault codes to tuning your car, or getting it stolen in under a minute.
If you have an Ghost immobiliser installed, it will protect your vehicle from theft using this method, by requiring that a unique PIN sequence is entered into the fob of your key in order to start the engine and then drive away. It does this by interacting with the vehicle's ECU (Engine Control Unit) on the CAN Data circuit and is totally undetectable to any scan or code grabbing technology. It comes with a Service/Valet mode that allows your vehicle to start without requiring a PIN code.
You will also need an OBD cable that has OBD pins that are connected to the CAN bus. These cables are available on Amazon/Ebay for around PS50. Also, you will require a cable with OBD pins connected to CAN Bus. These cables can be purchased on eBay or Amazon for PS50. Then, you need to splice the cable into the wire harness of your vehicle, for example, in the radio wiring harness.
Once the hacker has access to the OBD port on your vehicle, they are able to send diagnostics to the system at a high baud rate which can cause a crash to the car's CAN and stop the system from functioning. This can cause the engine to stop and doors to lock, or even the brakes to activate.
No need for additional remotes or key fobs
A car immobiliser is a excellent piece of anti-theft technology that is used by billions of modern cars around the world. Utilizing engine ECU software to prevent cars from starting if a fake transponder signal is transmitted to it an aftermarket immobiliser is an excellent way to safeguard your vehicle.
It is possible for thieves, if they know the code that disables an immobiliser, to bypass it. A burglar could easily remove the battery from most key fobs by prying them open. They could then use an instrument to remove the internal circuit board from an immobiliser and replace it with blank. Then, they will be able to start your car.
With the TASSA approved Ghost 2 immobiliser, there are no additional keys or remotes required. The immobiliser connects to the engine ECU (Engine Control Unit) via a subtle quiet CAN data circuit that is not detectable by diagnostic tools, such as those used by high-tech thieves. It doesn't come with a traditional keyfob that has an LED indicators, which means it's not visible.
There will be instances where you have to disable autowatch ghost 2 installers near me Ghost 2's auto-protection for instance, during the valet parking or servicing. The ghost CAN immobiliser has a special mode for this, referred to as 'Service Mode which can be activated with pressing the button on your smartphone. The car can still be operated, but the maximum speed is restricted to 36 mph.
If you'd like to learn more about the TASSA certified ghost immobiliser, please contact us today to arrange an appointment in our workshop. A member of our team will explain the process and provide you with your Ghost 2 emergency card, installation certificate, and security guarantee.
Simple PIN code Change Process
Ghost is a new generation device that secures your vehicle without cutting wires or adding aftermarket key fobs. It is directly connected to the vehicles CAN data network and a personalised PIN code is programmed in it using buttons on your steering wheel & the dash. The device doesn't emit RF signals, which means it is not able to be tampered with. This makes it inaccessible to sophisticated RF scanning or code grabbing technologies that modern thieves use.
The PIN code can be changed to lock out previous drivers or even include an override number if you forget the sequence. The installer will demonstrate the procedure to accomplish this during installation. The system also comes with a valet mode feature which can be used to temporarily disable the pin input sequence to allow your garage or mechanic can service the vehicle without needing to know the pin code. This is ideal for customers who want to give their car for valet parking or service but don't want divulge the pin sequence.
Unlike Thatcham products which require additional key fobs to operate, Ghost is a discreet system which takes advantage of the buttons on your car to create an unique and interchangeable PIN code sequence. This sequence is entered using the smartphone app, meaning that no additional LEDs are thrown and your car is safe from the risk of being disabled by hackers or other technology.
Tested for every vehicle
In contrast to key fobs that require you to press buttons and a ghost immobiliser can be hidden under your steering wheel or dash so that only you know it's even there. The device is connected to the CAN network of your vehicle, and a PIN code can be programmed by using the buttons on your car. The system won't permit your car to start until the code is entered. This means that thieves are unable to duplicate the keys on your car or access the OBD port to hack your vehicle.
Ghost is a feature that can be found in all vehicles, including electric vehicles, motorhomes, vans and bikes. Ghost is also extremely flexible and can be set to disable in various situations. It can be programmed to go into Valet mode, for instance when the vehicle is transferred to a valet service or parking company. This permits you to drive your vehicle within a 30mph speed limit, and the ghost immobiliser will activate itself when the vehicle returns to your home.
The device can be reset at any time using your personal PIN code. This is great if you lose the code, or when the device ceases to function.
It's also important to note that the device is unnoticeable to anyone who isn't familiar with it. It does this by running through the buttons on your steering wheel and dashboard, and using the data they send in order to identify the button that was pressed. This makes it a secure and reliable security system that cannot be altered by RF scanning, jamming, or a door lock pick set.