Your Family Will Be Thankful For Getting This Ghost Immobiliser Problems

Protect Your Pride And Joy With The Ghost Immobiliser

Guard your precious possessions from theft by using the Ghost 2 immobiliser Immobiliser. This system is discreet & does not require additional key fobs in order to operate.

The device uses existing buttons on your vehicle (steering wheel doors, door panels and centre console) to create a unique pin code sequence up to 20 presses long. This will then allow your vehicle to begin.

Simple PIN code change process

Many homeowners are upgrading their security because of the rise in vehicle theft. There are many different types of security gadgets that are sold aftermarket, from tracking systems to alarms and immobilisers. They're not all equally effective at protecting your car. A tracking system can assist you in locating your vehicle if it's stolen however it cannot prevent the crime. Immobilisers, however are exactly what is a ghost immobiliser they claim on the tin - they shut off your car's engine so that it can't be started. The Autowatch Ghost is one of the most sophisticated options available, making it nearly impossible for thieves to steal your car.

Utilizing the buttons already in your car, the ghost device creates an exclusive sequence that has to be entered before the engine will start. This can be done using the indicator stalk windows or heater buttons. There is also a mobile application that can be used as an emergency PIN override, which allows the driver to operate their vehicle without the need to use the button sequence. This feature is particularly useful when you need to surrender your car for valet parking or servicing because the immobiliser will remain activated, but not disabled.

The Ghost is a truly unique and innovative device which works in conjunction with buttons of your car instead of being a separate unit. It is not only an effective deterrent to vehicle theft, but it can also be used on any future vehicles you own. This makes it a far better investment than a conventional wheel lock.

Small, weatherproof device

The Autowatch Ghost Immobiliser is a sophisticated security system that protects your car from key hacking and cloning. It also stops ECU swapping. It's a small weatherproof device that connects with the ECU of your vehicle directly through the CAN bus to disable the motor. It can be fitted into the vehicle without additional wiring and has been thoroughly tested to ensure compatibility with all vehicles. It is also indestructible to jamming devices that are the most common method used by thieves to bypass existing immobilisers.

The benefit of using CAN data is that it operates silently when compared to conventional systems. It cannot be detected using sophisticated RF scanning and code-grabbing technology as well as recognized by conventional diagnostic tools. The Autowatch Ghost doesn't use LED indicators and instead uses buttons in your vehicle, such as the steering wheel, the centre console, or doors, to create a unique disarming sequence. You can even make this sequence as long as 20 presses to provide additional security. The iPhone app lets you make a single, authorised connection with the pairing code unique to the Ghost and communication between the two is secured.

The Ghost will stop car thieves from putting in an ignition key replacement or replacing the ECU to bypass the immobiliser. The engine can only be started if a valid PIN code is entered. It is able to be operated temporarily in Valet/Service mode (with parameters set such as a 30mph speed limit) which means you can offer your vehicle to a valet or service without needing to enter the code.

Each vehicle is tested

The Autowatch Ghost is the first aftermarket immobiliser for CAN bus that is able to be connected to the existing wiring in your vehicle and connects to your engine control unit (ECU). The device detects electronic signals to disable your car's system from going through its normal start-up routine until you input the passcode you have created. The system can be turned off or on via your smartphone's app without the need for additional wires.

The standard factory immobilisers function with a transponder which is built into the key. This sends a message to the ECU. If the correct code is sent the car will start however if the transponder is swapped with one from a different vehicle, the immobiliser will not recognise it. This makes it possible for the vehicle to start and be stolen. The Ghost immobiliser was created by a South African company at the forefront of vehicle security systems technology. It guards you against hacking or key cloning and even key theft. Only by physically towing your car away from thieves could they take it away, and they would still not be able to drive the vehicle.

Ghost makes use of the buttons on your vehicle, including the indicator stalk along with the steering wheel, indicator stalk and door panels to generate an unique PIN code that is changeable that must be entered before you can drive. This is done without additional hardware, like key fobs. It can take up 20 to 20 presses. It is also undetectable to diagnostic equipment and Ghost Immobiliser 2 doesn't transmit radio frequency signals, which means thieves are unable to utilize sophisticated RF scanning or code grabbing technology to detect that a security system has been installed.

Unlike physical anti-theft devices like clamps or wheel locks, Ghost is hidden within the vehicle to ensure that it can't be taken away or disabled by thieves and is even more difficult to get rid of than a car alarm that requires disarming using a button sequence. This makes it a fantastic complement to a GPS tracking device which can be used to locate your vehicle after it's been stolen.

Emergency PIN code override

You do not have to look far on social media for stories or videos of cars that have been stolen with the latest technology tools. This includes key-cloning devices and hacking tools that allow thieves to start the vehicle with your original keys.

Our Ghost Immobiliser 2 immobiliser is designed to combat this and offer an extra layer of security in order to protect your vehicle from being targeted by thieves. It is created by creating a unique pin code push sequence from your buttons on the steering wheel, door panel, and the center console. This unique PIN must be entered together with your original key fob to prevent the vehicle from beginning. The unique override pin can be found on the black card that you will receive following installation and is easy to remember because there are no LED indicators.

The device is hidden within the wiring of the vehicle and doesn't emit radio signals. This means it can't be detected by diagnostic software that can determine the type of security system you have installed. This makes it a great alternative to an alarm.

Unlike most other security systems that have a relay inside the engine bay, these CANBUS Immobilisers connect with the car's ECU and BCM via the CAN data bus (brand dependant). This enables them to shut down the vehicle completely through the use of a digital block of commands for both the ECU and the engine.

It is also possible to connect a separate analog immobiliser, alarm or tracker to these systems, but this has to be stated prior to the installation of the device. They are also fully service/valet mode compatible and a great alternative to a tracker you have your car checked for repair at the dealer.

Service/Valet Mode

In recent times, there has been a increase in the number of vehicles that are stolen without owners' keys. It's now easier than ever before to steal your pride & joy with the availability of key cloning tools & door lock picks. To prevent this from happening, we have launched the Autowatch Ghost immobiliser that prevents your car from being driven even if your keys were cloned or your car has been stolen.

It connects directly to your vehicle's ECU (Engine Control Unit) via the CAN data circuit. It's completely silent as it doesn't use radio frequency or a key fob. This means that it can't be detected by diagnostics or other vehicle hacking devices. It also protects you from adding a new ECU or key to circumvent the system, as only the PIN code allows the engine to be started.

The device is hidden within your car and is reached via the buttons on your steering wheel, center console, and door panels. Before you can start your vehicle, you must enter a unique and reversible PIN number that is up to 20 numbers.

This is the first aftermarket CAN-bus immobiliser for the market that is being designed. It will stop your vehicle from being driven or even started when you don't enter a PIN code first. If you're driving away with the device in motion the indicator will flash on your dashboard and flash continuously for about 300m. Entering your PIN code will turn off the anti-hijack. Your car will continue to run normally. If you don't enter your PIN at this time the indicator will continue to flash and will require a new PIN each time you attempt to start your car.